Alloy B, UNS N1001
Chemical composition % Ni Mo Fe Co Cr C Mn Si P S V min balance 26.0 4.0 0.20 max 30.0 6.0 2.5 1.00 0.050 1.00 1.00 0.040 0.030 0.40 Physical properties Density 9.24 g/cm3 Melting range 1330-1380°C Microstructure Alloy B has a face-centered cubic (FCC) structure. Its chemical composition is designed to […]
254MO,S31254,1.4547
Alloy % Ni Cr Mo Cu N C Mn Si P S 254SMO Min. 17.5 19.5 6 0.5 0.18 Max. 18.5 20.5 6.5 1 0.22 0.02 1 0.8 0.03 0.01 254SMO Physical properties： Density 8.0 g/cm3 Melting point 1320-1390 °C 254SMO minimum mechanical properties in the room temperature: Status Tensile strength Rm N […]
Alloy K-500, UNS N05500
Alloy K-500 ( UNS NO5500 ) Summary A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to temperatures as lowas -101°. Used for pump shafts,oil-well tools and instruments,doctor blads and scrapers,springs,value rim,fasteners,and marine propeller shafts. Standard Product Forms Pipe,tube,sheet,strip,plate,round […]
Alloy 400, UNS N04400
Alloy 400 (UNS NO4400) Summary A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water,hydrofluoric acid,sulfuric acid,and alkalies. Used for marine engineering,chemical and hydrocarbon processing equipment,valves,pumps,shafts,fittings,fasteners,and heat exchangers. Standard Product Forms Pipe,tube,sheet,strip,plate,round bar,flat bar,forging stock,hexagon and wire. Chemical Composition Wt,% Min Max. Min. Max. Min. Max. Ni […]
Alloy 718, UNS N07718
Microstructure Alloy 718 is an age-hardenable austenitic material. Strength is largely dependent on the precipitation of the primary phase during heat treatment. Alloy 718 Characteristics Good fabricability in the annealed condition; Good tensile, fatigue, and creep-rupture strengths, up to 700℃; High-temperature strength up to 700℃; Good oxidation resistance up to 1000℃; Excellent mechanical properties […]
Alloy 625, UNS N06625
Microstructure Alloy 625 is a solid-solution matrix-stiffened face-centered cubic alloy. Alloy 625 Characteristics Due to its low carbon content and stabilizing heat treatment, Inconel 625 shows little tendency to sensitization even after 50 hours at temperatures in the range of 650~450℃; The alloy is supplied in a soft-annealed condition for applications involving wet corrosion […]